There are several additional properties that OLI Flowsheet: ESP can calculate, but they are disabled because the calculation adds some additional time to the calculation.
These calculations are:
- Diffusivities
- Gibbs Free Energy
- Entropy
- Viscosity
- Electrical Conductivity
- Heat Capacity
- Thermal Conductivity
- Surface Tension
- Interfacial Tension
- Pre-Scaling Tendencies
- Total Dissolved Solids
- Alkalinity
- pH @ 25 °C and 1 atm
Here is a short video on how to enable an optional property. We are using Viscosity in the Liquid-1 phase as an example. Please note that the video uses version 12.0.0.11 of the software; screens may differ slightly in other versions.